Outdoor shower doors can be tricky to get open.
It’s easier to just put a towel in the door and close it with your finger.
But if you don’t have a towel, you can use a shower curtain to get a seal between the door frame and the wall.
Here’s how to do it. 1.
Cut a curtain in half, about 4 inches wide, with a 1-inch strip of string attached to one end.
Cut it down to about 1/2-inch thick and thread it through the curtain.
Wrap a sheet of paper around the outside edge of the curtain, then cut a piece of fabric that matches the length of the fabric and about the width of the sheet.
Thread the curtain down the length and over the top of the paper, using the string and the paper as a seal.
Using a rubber band or zip tie, secure the curtain to the wall using the thread.